|


簡介
- 測量範圍:0~360度
- 精確度:±3度(校正後)
- 工作電源:DC12~30V
- 輸出信號:DC 4~20mA.
- 閥體材質:鋁合金,葉片材質:不�袗�.
- 最大承受風速70米/秒.
- 工作溫度:-20~80 ℃
- 工作濕度:0~90%RH.
- 防護等級:IP65.
FEATURES
- Measuring range : 0 to 360 degrees.
- Start wind speed : ≤ 0.5 m/s.
- Accuracy : ±3 degrees ( after calibration ).
- Power supply : DC 12 to 30 V.
- Output signal : 4 to 20 mA
- 4 mA = 0 degree
- 20 mA = 360 degrees
- 3 wires : Brown ( + Vcc ), White ( + Iout ), Blue ( Ground ).
- Typical load resistance : < 250 ohm.
- Body material : Aluminum alloy.
- Vane material : Stainless steel.
- Max. wind speed : 70 m/s.
- Operating Temp. : -20 to 80 oC.
- Operating humidity : 0 to 90 %RH.
- Protection class : IP65.
- When TR-AM3W cooperate the 4-20 mA Controller/Alarm/Indicator CT-2012, then whole system will become the high performance Wind direction Controller/Alarm/Indicator.
一般規格
- 測量範圍:0〜360°
- 啟動風速:≤ 0.5米/秒
- 精確度:±3度(校準後)
- 電源:DC 12〜30 V
- 輸出信號:4至20 mA
- 4毫安= 0度
- 20毫安= 360度
- *3線式:棕色(+ VCC),白色(+輸出),藍色(接地)
- 基本負載電阻:<250歐姆
- 閥體材質:鋁合金
- 葉片材質:不�袗�
- 最大承受風速:70米/秒
- 工作溫度:-20 至 80 ℃
- 工作濕度:0〜90%RH
- 防水等級:IP65
- 當 TR-AM3W 組合 CT-2012 後整個系統將成為高性能風向之控制器/警報/指示器
|
|